PoSition of the braCketS:
On the back of the casing of the awning, there are stickers with the definition of the bracket positions.
Mark the positional points on the base material.
Try to find the ideal position for the bracket center.
Do not go beyond the limit areas of the bracket centers, this could lead to damages to or a malfunction of the awning.
determination of the mounting height for wall-mounted awningS:
The mounting height depends on the extended length and inclination of the awning. Please refer to the drawing on the right for
basic orientation. Always ensure that there is sufficient headroom.
2.
4
mounting height and PoSition of the braCketS
mounting height:
The awning can produce crushing forces and shear stresses, for instance between the drop profile and the casing, on
the articulated arms and at the point where different profiles meet. To protect human safety, the mounting height must be
at least 2.50m. If the situation requires a mounting height less than the stated minimum height, the awning must be ope-
rated exclusively with a switch mounted at a location from where the moving parts can be observed.
The awning is appropriate to a limited extent as a means of protection against rain. In any event, the minimum inclinati-
on for such applications must be 14°. The limitations of the use are defined in the relevant operating instructions.
www.helioscreen.com.au | Phone 1300 766 319
Helioscreen Rubix
• INSTALLATION GUIDE | 5
