20
WWW.
WOUNDWO
.COM
5.
INITIAL OPERATION
Remove all transport protection materials (card, foam piece between blind and box, styrofoam pieces).
For test runs with motorised systems, always use the control cable. The operator must always have sight of the system during the test run.
•
Completely retract and extend the system again and check the end positions.
•
The bottom rail must not rest on the window sill when in the end position.
•
Adjusting the motor end stop is explained in the motor setting instructions enclosed
www.helioscreen.com.au | Phone 1300 766 319
Helioscreen HMX Zip Series
• INSTALLATION GUIDE | 10
