Helios KWL-MZB-BE Скачать руководство пользователя страница 9

1 .0

 

General information

In order to ensure complete and effective operation and for your own safety, all 
of the following instructions should be read carefully and observed. The relevant 
national standards, safety regulations and instructions (e.g. DIN EN VDE 0100) as 
well as the technical connection conditions of the energy supply company must 
be observed and applied.
Keep the Installation and Operating Instructions as a reference. After the final 
assembly the document must be handed out to the operator (tenant/owner).

1 .1  Warning and safety instructions 

The adjacent symbol is a safety-relevant warning symbol . All safety regula-
tions and/or symbols must be absolutely adhered to, so that any dangerous 
situation is avoided .

1 .2  Warranty and liability claims

In order to safeguard the guarantee and liability claims of the customer, the follo-
wing information must be observed:
– Implementation according to “unit” Installation and Operating Instructions.
– The use of accessories, which are not approved, recommended or offered by 

Helios, is not permissible. Any damages are excluded from the guarantee.

If these instructions are not observed, all warranty claims are excluded. This also 
applies to any liability claims extended to the manufacturer.

1 .3  Regulations – Guidelines

If the product is installed correctly and used to its intended purpose, it conforms to 
all applicable regulations and CE guidelines at its date of manufacture.

1 .4 Receipt

Please check delivery immediately on receipt for accuracy and damage. If dama-
ged, please notify the carrier immediately. In case of delayed notification, any pos-
sible claim may be void.

1 .5 Storage

When storing for a prolonged time, the following steps are to be taken to avoid 
damaging influences: Protection by dry, air-dustproof packing (plastic bags with 
drying agent and moisture indicators). The storage place must be waterproof, 
vibration-free and free of temperature variations. Damages due to improper trans-
portation, storage or commissioning must be verified and are not liable for war-
ranty.

CHAPTER 1

 

GENERAL 

INFORMATION

 

m

 EN

1

Control element - KWL-MZB-BE

Installation and Operating Instructions

Содержание KWL-MZB-BE

















Отзывы: