Installation and Mounting Directions
Once assembled place on the back of your display and line up with the VESA
screw receptacles, using the correct screws for your display secure the TV
Bracket Arms (B), then secure the Fixed Arm © to the TV Bracket Arms (B)
with the included hardware.
Please use the correct screw and washer for the holes on the back of your
display, using the incorrect screw will cause damage to the display.
Note that uneven assembly will cause a slanted screen.
Step 5:
Mount the Slide Arm Mount (E) onto the now mounted Wall Plate (A)
and select your left to right position. Once you have the Slide Arm Mount (E) in
the desired location secure into place by tightening the the two screws at the
bottom of the Slide Arm Mount (E) back plate.
5
FML64PL Safety
1
A--Wall plate 1pc
Supplied Parts and Hardware: Some parts not shown at same scale
Safety Warning:
Thanks for choosing this Helios wall mount and please read these instructions
carefully before using the model FML64PL to avoid any injury of anybody and(or) any property
loss. If you do not understand these directions, or have any doubts about the safety of the
installation, please call a qualified contractor or contact Helios customer service department.
Please check carefully to make sure that there are no missing or defective parts. Our customer
representatives can quickly assist you with installation questions and missing or defective
parts. Replacement parts for products purchased through authorized dealers will be shipped to you
directly. Never use defective parts, improper installation may cause damage or serious injuiry. Do not
use this product for any purpose that is not explicitly specified by Helios. Helios is not liable for
damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
C--Fixed arm
2pcs
B--TV bracket
2pcs
(Als
o Figur
e 8)
E- Slide Arm Plate
D- Connecting Plate
option 1 VESA size:75*75mm,100*100mm.
2
figure 2
option 2 VESA size:(200-400)*600mm.
Instruction:Attach connecting plate (D) to arm (C) using 4 ,slide
TV bracket (B) onto (C).(figure 2).
Step 1
：
Read and understand all the directions,handle and use according to the directions
strictly.
Safety Directions:
Step 3
：
As per different VESA size to choose the suitable unit to assemble them.
Assembly Hareware：
Hardware for TV assembly：
2 - square head
screw 4pcs
3 - concrete
bolt 4pcs
1 - washer
4pcs
a
-
bolt
4pcs
b
-
bolt
4pcs
c
-
bolt
4pcs
d
-
bolt
4pcs
e
-
bolt
4pcs
g
-
washer
4pcs
h
-
washer
4pcs
i
-
spacer
4pcs
f
-
bolt
4pcs
j
-
wrench
1pcs
k
-
wrench
1pcs
4 -
bolt
8pcs
4
4
Step 2
：
Remove the screws 5 to separate it into two parts.
B
