Safety Warning
Thank you for selecting the Helios FML64PL for your installation.
Before starting your installation please read and understand all of the
directions.
If you are unsure or have any doubts about the installation please contact
an installation professional or Helios customer support.
• Check the packing list and boxed products carefully to verify
that there are no missing and/or damaged parts.
• Never use damaged or incorrect parts to do your installation as
that may cause property damage or personal injury.
• Our customer service can quickly assist you with installation
questions or parts request.
• Do not use the Helios FML 64PL for any purpose other than
that specified by Helios. Helios is not liable for damage or injury
caused by incorrect assembly, mounting or use.
Helios customer support:
Hours: Monday – Friday, 9 AM to 7 PM
Phone Number: (866) 839-9187
Email: [email protected]
Installation and Mounting Directions
Step 1: Read manual completely and understand all of the
directions prior to starting the installation.
Use FML64PL only as described in the directions.
Step 2:
Disconnect the Connecting Plate (D) from the articulated arm by
removing the screws at the bottom rear of the Connecting Plate (D) next
lift the Connecting Plate (D) up and away from the articulated arm.
Then remove the Slide Plate (E) from the Wall Plate (A) by loosing the
two bottom screws and lifting the Slide Plate (E) up and away from the
Wall Plate (A).
2
option 1 VESA size:75*75mm,100*100mm.
2
figure 2
option 2 VESA size:(200-400)*600mm.
Instruction:Attach connecting plate (D) to arm (C) using 4 ,slide
TV bracket (B) onto (C).(figure 2).
Step 1
：
Read and understand all the directions,handle and use according to the directions
strictly.
Safety Directions:
Step 3
：
As per different VESA size to choose the suitable unit to assemble them.
Assembly Hareware：
Hardware for TV assembly：
2 - square head
screw 4pcs
3 - concrete
bolt 4pcs
1 - washer
4pcs
a
-
bolt
4pcs
b
-
bolt
4pcs
c
-
bolt
4pcs
d
-
bolt
4pcs
e
-
bolt
4pcs
g
-
washer
4pcs
h
-
washer
4pcs
i
-
spacer
4pcs
f
-
bolt
4pcs
j
-
wrench
1pcs
k
-
wrench
1pcs
4 -
bolt
8pcs
4
4
Step 2
：
Remove the screws 5 to separate it into two parts.
D
E
Figure 3
