Helios 6T Series, Эксплуатация/обслуживание и установка

Страница: 3 / 27

INSTALLATION MANUAL – 2012
2
HUSA-EN-UL-REV 2.0 APR 16 2012
TECHNICAL CHARACTERISTICS
Helios Solar Works solar modules belong to the latest generation of mono-crystalline and multi-crystalline 6
in. (156mm) cells. Their contoured surface and triple conduction band systems provide higher generating
power and homogeneous aesthetics.
Each module consists of 60, 72, or 96 high-quality cells in serial configuration to achieve optimal power and
voltage for photovoltaic systems, either connected to the grid or not.
Before designing, assembling, operating, or proceeding with the maintenance of the 6T, 7T2 and 9T6
Series photovoltaic module, please carefully read all of the instructions and recommendations in this
manual.
Helios Solar Works disclaims any liability for breakage, deterioration or the loss of performance of any of
our modules resulting from the incorrect installation, use, and/or maintenance.
The junction box has a level of protection of IP65 against infiltration of dust and water and houses the
connection of the metallic output bands of the module to the cables (positive and negative). The bypass
diodes are connected inside the junction box ensuring the thermal stability of the cells in case of shading
during the hours of irradiation.
Two isolated copper cables, 4mm
2
(see annex A for AWG mm
2
sizing) and 1.2 m long emerge from the
junction box. Each cable is connected at its end with MC compatible plugs, one male, and one female,
which facilitate the connection of the modules by forming serial connections to reach the adequate voltage
for the system.