Helion Rivos, Руководство по эксплуатации

Страница: 6 / 11

6
Preparing your Boat
Placethetophatchinpositionandrotatethe
latch to secure.
Important
Do not arm the boat motor until you have
placed the boat into the water.
Once in the water, arm the motor by
pushing the throttle trigger forward and
then pulling it to the rear.
Binding/Pairing
Insert
Bind Plug
Transmitter Bind Bu tton
Press and Hold
The Rivos comes already bound/paired. If however you
need to bind/pairfollowtheseinstructions.
WiththetransmitterswitchedOFF
Plug in the bind jumper plug (included in your spare
parts bag) into the CH3/Bind Slot on the Receiver. Plug
thebatteryintotheelectronicspeedcontrol(ESC)The
redLEDonthereceiverwillblinkrapidlyindicatingthatit
is in bind/pair mode.
Pressandholdthebindbuttononthetransmitterwhile
sliding the power switch ON.
Releasethebuttonafterthetransmitterpowersup.The
transmitterwillmakeabeepingsoundtoindicatethat
it is in bind/pair mode. Within approximately 5 seconds
the Rivos will link and the rudder will center and LED will
go solid.
Remove the bind plug from the receiver. You are ready to
run.
Slideyourfullychargeddrivebatteryintothehullandstrapinplacewiththehookandloop
fasteners.Withyourtransmitterturnedon,plugthedrivebatteryintothespeedcontrol.