Helion AURA 650, Инструкция по эксплуатации

Страница: 9 / 14

26 . Loosen the screw on
the arm of the main boom
to adjust the height of main
boom. This adjustment is
rarely needed.
9 / 14
LED
Pair Transmitter and Receiver
Pairing (or binding) is the process of programming the receiver
to recognize the G UI D ( Globally Unique I dentif ier) code of a
single specific transmitter. When a receiver is bound to a
transmitter, the receiver will only respond to that specific transmitter.
The yacht normally comes with the receiver paired to the transmitter.
If you need to repeat this pairing process for any reason, please
follow these steps:
1. With the transmitter switched ON
2. Power on the receiver, then press the pairing button several
times within 5 seconds.
3. After the receiver LED stops flashing the pairing process is
complete.
4. You are now ready to sail.
Bind Button
Antenna
Loosen this screw
Power - Channel ELEV
Rudder Stick - Channel AILE
Sail Stick - Channel THRO
24. Move bow sie attached
to the main sail grommet to
tighten or loosen the main
sail sheet.
25 . Move bow sie on main
sail backstay rigging to maintain
a slight bend in the mast. The
dotted line in the drawing to
the left is an exaggerated
example of the concept the
bow that you will create will
be less pronounced than the
drawing shows.