background image

1/18th SCALE 4x4

ELECTRIC TRUGGY

SAFETY TIPS...

#

ADJUSTMENTS AND TUNING CONTINUED...

#

7

Although great for first time users, Helion RC products are indeed advanced radio controlled vehicles with 

sensitive electronics and moving parts capable of causing injury if used improperly. Always use caution and 

common sense as failure to operate your Helion RC product in a safe and responsible manner can result in 

damage to the product or other properties. Therefore this product is not intended for use or maintenance 

by children without direct adult supervision. Helion RC and your hobby dealer shall not be liable for any loss 

or damages, whether direct, indirect, special, incidental, or consequential, arising from the use, misuse, or 

abuse of this product or any product required to operate or maintain it

• 

For your safety, do not operate your vehicle in rain, electrical, or thunder storms

• 

The vehicle should never be turned ON without the transmitter being turned ON

• 

Never operate your vehicle when with low transmitter batteries

 ›

Indicated by flashing LED on the transmitter

• 

Always check for proper radio system operation (steering and throttle) prior to letting go of the vehicle. If 

the vehicle does not respond properly to transmitter input, turn the vehicle OFF and inspect all connec

-

tions and operating environment. Also see the Troubleshooting guide in this manual

• 

Operate in a dry (no puddles), open environment away from traffic, and cars (never run into the street 

for any reason)

• 

Always turn off both transmitter and ESC and disconnect the battery from the ESC after use

• 

Exercise extreme caution when touching the motor immediately after running your vehicle, it may be 

HOT and may cause a burn

• 

Always allow the motor in your vehicle to cool before using again

NOTE: Only use genuine replacement or aftermarket parts available from your local hobby dealer to en

-

sure proper operation of your Helion RC product.

locations

Battery position: 

It is possible to run your Animus 18TR with the battery either in a forward or rear position.

• 

The battery is located in the rear position from the factory. This is ideal for optimum traction and stability.

• 

If you desire more responsive steering and less stability, moving the battery to the forward position will 

provide this feeling

Body Mount Height: 

The body mounts on the Animus 18TR are capable of vertical adjustment with 4 height 

options available

• 

The default setting allows for the lowest body position while maintaining component clearance

• 

Adjust the body mounts to achieve a desired look

Содержание Animus 18TR HLNA0602

















Отзывы: