MC6500GOPRO Camera Gimbal
Page 2
CAUTIONS
To obtain the best performance of this product, please read through the manual carefully and assemble the
parts according to the detailed instructions. Additional tools you need to use are as follows: 2.0mm allen driver,
small slotted screwdriver or small phillips screwdriver, small clamp and high quality instant adhesive.
Note: Most parts of this camera gimbal need to be adhered by instant adhesive, so please pay attention to the
following points when you using it:
1. proper amount of instant adhesive (Neither too much nor too little);
2. Protect yourself (Don't let the adhesive get into your mouth or eyes, or between your fingers);
3. Absorb the extra undried adhesive by absorbent paper to keep clean appearance of this gimbal;
4. Apply the adhesive on the back of the parts which could help keep the appearance neat and clean;
The parts can be adhered quickly by applying high quality instant adhesive. And the structural strength could
fully meet the requirements in use.
Dimension
96mm
47.5mm
57mm
96mm
Dampers
Dampers
Co-Dampers
DCS2600Digi
DCS2600Digi
Digital Servo
Special for TILT Axis.
DCS3600Digi
DCS3600Digi
Digital Servo
Special for ROLL Axis.
