HELGI - The Digital Courtyard Via Artigiani 29/31 29020 Vigolzone (PC) Italy
E-mail: [email protected] | [email protected] | Web: www.HELGI-europe.com
11
HELGI IFP V SERIES
USER GUIDE
Settings Menu
General Settings
OSD
Menu Operation
Touch Menu Operation
Call up Method
Take middle point position on the bottom of display screen as starting point, use touch pen to drag towards screen center position to
call up touch menu, as shown below.
Note: “Touch A Method” mentioned in this manual to call up touch menu method is shown above.
Press the INPUT button on the remote control or use Touch Method A to access general settings.
Press the buttons on the remote control to select the desired channel
Press the Enter button on the remote control or tap with your finger to confirm the choice
Press Enter on the remote control, or touch the area outside the menu to exit
Note: the PC channel will show as available only with a built-in PC actually connected to the monitor. The Android channel will show
as available only with an Android module connected to the monitor.
