6.3
Bi-directional IR pass back
1)
It supports bi-directional IR pass back . User can c o n t r o l DVD at TX end and
control TV at RX end.
2)
If control at RX end, please connect IR blaster extension cable with IR OUT of
TX and connect IR receiver extension cable with IR IN of RX. If control at TX
end, please connect IR receiver extension cable with IR IN of TX and connect IR
blaster extension cable with IR OUT of RX.
7.
FAQ
Q
：
No image output?
A
：
Check the led indicator status to make sure all connections are good and
stable.
Q
：
Signal led ”3” is flashing but no image output?
A
：
Check if the HDMI display device has been switched to the right HDMI input
channel.
Q
：
Signal led “2” is flashing but “3” light is off?
A
：
Check whether the TX's HDMI IN has signal input and make sure RX's HDMI
OUT is well connected with HDMI display.
