Installation instructions article no.: 500645
Seite 3 von 3
Stand 17.01.2020
RGB-CCT controls:
•
Remove the battery protection foil at the remote control unit.
•
The lighting is switched on and off with the remote control unit.
•
The battery has to be changed if it starts to lose power. Open the battery compartment on the lower side
of the remote control unit, remove the old battery and insert a new type CR 2025 3V button battery.
Reclose the battery compartment.
Care and servicing:
•
You must make sure that the power supply is disconnected before cleaning.
•
Use a dry, or slightly damp cloth for cleaning.
•
Never use chemicals, solvents, alcohol or abrasives for cleaning.
•
Remove the batteries and store in dry, protected rooms if the remote control unit is not being
used over a longer period of time.
Disposal:
•
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
•
Batteries must not be disposed of in the household waste. You are legally obliged, as a final
consumer, to return used batteries. You can return batteries after use to the sales point or the
immediate vicinity (public collection points or retail outlets, for example, without charge).
•
Batteries may only be returned in a drained to the used battery bin at the retail outlet and at
public disposal outlets. Batteries which are not completely drained must be prevented from
short circuiting. Short circuiting can be prevented by taping over the terminals with adhesive
tape.
on/off
brightness
color selection
color change
7 colors
color change
3 colors
60 sec. timer
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
night light
