H. Vollmer GmbH
Installation instructions art. no: 45017
Page 2 of 3
Date 05.08.2015
4. Before installation/usage for the first time
The table plug socket should only be used out of the packaging.
Carefully take the product out of the packaging.
Before you use the table plug socket, make sure that it has not been damaged in transit. The table plug
socket should not be used in the event of damage to electrical parts. Repairs should only be carried out
by a qualified electrician.
Keep packaging material away from children and pets. Risk of suffocation!
Make sure that the connected load used in your domestic installation corresponds with the data on the
rating plate of the product.
5. Installation/Usage for the first time
Make sure that the substrate is suitable for reliably holding the weight of the concealed table plug
socket.
Using a saw, cut out the installation dimensions at the desired position. In order to fasten the concealed
table plug socket, turn the black fastening ring downwards from the screw thread. Then lower the table
plug socket into the intended opening and from below, screw the fastening ring over the thread again
until the table plug socket sits rigidly and securely. Make sure that no wires are damaged.
Once mounted, the table plug socket can only be realigned and locked by loosening and refastening
the fastening ring.
Do not kink the wire; make sure the wire and the plug are free from tensile and torsional strains. Protect
all wires and insulation from damage.
Carefully plug the connector plug into the in socket (fitted in the building)
6. Opening/Closing
Pres the ring downwards
Pull bar upwards – the plug socket will be pulled from the table
To close, simply press down again.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
