H. Vollmer GmbH
Installation Instructions Art. No: 38321
Page 1 of 3
Dated 28.12.2015
GB Installation and Operating Instructions
LED Strip
Art. No. 38321
These operating instructions refer exclusively to the above products.
They contain important notes concerning operating the product for the first time and handling
the LED strip.
Therefore pay attention to these operating instructions, even if you pass this product on to
third parties.
It is important, therefore, that these instructions are archived carefully for referring to information at a
later stage.
1. Introduction
Dear customer, thank you for deciding to purchase our product.
You have acquired a product from Vollmer, which has been built according to the current state of
technology.
The LED strip fulfils the requirements of effective European and national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
instructions of this operation manual!
2. Safety Instructions
The guarantee becomes invalid if damage occurs due to the failure of following these operating
instructions!
We do not accept liability for any consequential damage!
Do not switch the LED strip when rolled up.
Do not allow the LED strip to come into contact with extreme heat or naked flames.
We do not accept liability for any personal injury or damages to property caused by incorrect handling
or failure to observe the safety advice.
In such cases, all warranty claims are rendered void.
The type plate must not be removed.
3. Proper Use
The LED strip provides a decorative light and play of light
in interiors, on walls and ceilings, in kitchens and much more.
High performance light diodes (LED) are installed as a light source.
These LEDs guaranteed high luminosity with low electricity consumption.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein