1 of 3 | 19.10.2016
GB Installation and Operating Instructions
LED Strip
Art. No. 38049
These operating instructions solely relate to product 38049.
They contain important notes concerning operating the product for the first time and handling
the LED strip.
Therefore pay attention to these operating instructions, even if you pass this product on to
third parties.
It is important, therefore, that these instructions are archived carefully for referring to information at a
later stage.
1. Introduction
Dear customer, thank you for deciding to purchase our product.
You have acquired a product from Vollmer, which has been built according to the current state of
technology.
The LED strip fulfils the requirements of effective European and national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
instructions of this operation manual!
2. Safety Instructions / Warnings
The guarantee becomes invalid if damage occurs due to the failure of following these operating
instructions!
We do not accept liability for any consequential damage!
Do not switch the LED strip when rolled up.
We do not accept liability for any personal injury or damages to property caused by incorrect handling
or failure to observe the safety advice. In such cases, all warranty claims are rendered void.
The type plate must not be removed.
Avoid staring into the activated LED!
Remove the batteries for longer periods out of use. Batteries may leak (risk of chemical burns).
3. Proper Use
The LED strip is an indoor light decoration and play of light on walls and ceilings, in kitchens and lots more.
High performance Light Emitting Diodes (LED) are integrated as sources of light. These LEDs guaranteed
high luminosity with low electricity consumption.
