3 of 5 | 20.03.2017
With an external ballast
6. Faulty Function
Light does not switch on
Light switched on at the wall switch?
Transformer mounted and connected properly?
If available; remote control intact? Check the batteries.
Check the connected lines.
Important
: If several lights are programmed together as a group on one activation key (1,2,3 or 4),
instead of simultaneous programming, you should teach each light individually in sequence whilst
disconnecting the other spotlights from the power supply. This prevents incorrect teaching.
If problems still occur despite these measures (possibly due to function testing programming in the
factory), run through the light unlearning process described in point 5 in addition beforehand.
1
2
3
4
