Heisei HPC FF Series, Руководство пользователя

Страница: 31 / 49

HPC FF USER MANUAL
4-25
Chapter 4 UEFI BIOS S
ETUP
This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI
chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP
UTILITY when you start up the computer. Please press <F2> or <Del> during the
Power‐On‐Self‐Test (POST) to enter the UEFI SETUP UTILITY, otherwise, POST will continue
with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing <Ctl>
+ <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may also
restart by turning the system off and then back on.
4.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main To set up the system time/date information
Advanced To set up the advanced UEFI features
H/W Monitor To display current hardware status
Security To set up the security features
Boot To set up the default system device to locate and load the Operating System
Exit To exit the current screen or the UEFI SETUP UTILITY
Use < > key or < > key to choose among the selections on the menu bar, and then press <Enter> to
get into the sub screen. You can also use the mouse to click your required item.