Heinrichs Messtechnik
Installation and Operation Manual PITe
Page 5 of 22
1.3 Warranty
Your flowmeter was manufactured in accordance with the highest quality standards and was
thoroughly tested prior to shipment. However, in the event any problem arises with your device, we will
be happy to resolve the problem for you as quickly as possible under the terms of the warranty which
can be found in the terms and conditions of delivery. Your warranty will only be honoured if the device
was installed and operated in accordance with the instructions for your device. Any mounting,
commissioning and/or maintenance work is to be carried out by qualified and authorised technicians
only.
Heinrichs Messtechnik GmbH extends no express or implied warranty in regard to the applicability of
the present document for any purpose other than that described.
2 Identification
2.1 Manufacturer/supplier
Heinrichs Messtechnik GmbH
Robert-Perthel-Str. 9
⋅
D-50739 Cologne
Phone: +49 (221) 49708 – 0, Fax: +49 (221) 49708 - 178
Internet:
http://www.heinrichs.eu
, e-mail:
mailto:[email protected]
2.2 Product
Product type:
Magnetic – inductive flow sensor based upon Faraday’s law of induction
Application:
Bi-directional measurement of fluids with a minimum conductivity of 50µS / cm
Product name:
PITe-xxx
File version No.:
DRAFT-PITE_BA_02_EN_25-01-2017
Issue date:
17.02.2017
Converting Transmitters:
UMF2 (B)
3 Use in hazardous areas
The flow meter PITe-xxx is not intended for use in hazardous areas.
