Heinrichs KDSE, Руководство по эксплуатации

Страница: 3 / 14

Heinrichs Messtechnik GmbH
Ex- Supplement operating manual KDSE Page 3 of 14
Introduction
I. Shipping and storage; product inspection
The device is to be safeguarded against moisture, dirt, impact and damage.
Product inspection
Upon receipt of the product, the consignment should be checked for
completeness. The data of the device have
to be compared with the packing slip and the order documents
Notify us of any shipping damage immediately upon receipt of the product. Any damage claim received at a later
time will not be honored.
II. Warranty
Your flow meter was manufactured in accordance with the highest quality standards and was thoroughly tested
prior to shipment. However, in the event any problem arises with your device, we will be happy to resolve the
problem for you as quickly as possible under the terms of the warranty which can be found in the terms and
conditions of delivery. Your warranty will only be honored if the device was installed and operated in accordance
with the instructions for your device. Any mounting, commissioning and/or maintenance work is to be carried
out by qualified and authorized technicians only.
III. Validity of this operating manual
The present instructions apply to explosion-proof transmitter type KDSE as of year of construc-
tion February 2021
These instructions are supplementary operating manual for non-explosion proof meters. If you
do not have a copy of the latter instructions, please request one from Heinrichs Messtechnik
GmbH or download the instructions from our website.
The instructions herein pertain primarily to explosion proof magnetic-inductive flow meters. The technical data
in the mounting and operating instructions for non-explosion proof magnetic-inductive flow meters still apply
insofar as the present instructions do not replace them or exclude their application.
IV. Returning the device for repairs or servicing
Note: According to German waste disposal legislation, it is the owner’s or customer’s responsibility to dispose
of hazardous waste. Thus, before any devices are returned to Heinrichs Messtechnik for servicing or repairs the
following measures must be performed:

When returning the unit for an inspection, please enclose as detailed a description as possible of the fault
and the specific application, as well as the chemical-physical properties of the measurement medium.

Remove all residue of measurement medium which may be present. paying special attention to the gasket
grooves and crevices. This is especially important if the medium is detrimental to health and safety, for
example: corrosive, poisonous, carcinogenic or radioactive etc.
Costs, which result from insufficient cleaning, (disposal and/or personal injuries) will be invoiced to the cus-
tomer.