In the "System Settings Main Menu", click the " Restore Factory Settings" submenu, enter into "Restore
Factory Settings Menu": click, it will pop up a warning dialog box prompts, [Note this careful operation], if need to
confirm, then click " " again to confirm, otherwise, please click " " Cancel.
Restore Factory Settings the "System Settings Main Menu", click the " device detection switch" submenu,
enter into "device detection switch menu", click the check box " ", the corresponding function working
state can be detected, uncheck the “ '' it shows they don’t detect their equipment working conditions,
namely: device fails, the system will default to its normal state, see "Device detection switch menu"
In the "System Settings Main Menu", click the " telephone interface" submenu, enter into "telephone
interface menu", you can view the status of settings, the phone can be preset to adjust the input volume, view the
trigger time of help state, and view the number of calls see "telephone interface menu";
Host 01 telephone interface
•
Prompt tone: on / off, indicates the current remote telephone prompt tone is on / off status, can be set in the PC
software.
•
Tracks: 1,2, indicates the track of prompt tone, the former is the system prompt tone before the speech, the
later is the system beep after the closing speech, it can be set in the PC software.
•
Input Volume: 31, indicates the volume level of the current remote telephone, you can click on the " "
key to adjust.
Digital Network Public Address & Voice Alarm System
HEINRICH
HEINRICH LIMITED,
71-75 SHELTON STREET COVENT GARDEN LONDON
T:
+442032860291
W:
www.heinrichlimited.com
E:
