Heinner VTE001, Инструкция по эксплуатации

Страница: 7 / 9

CORDLESS DRILL
1. Switch
2. Chuck
3. Torque Ring
4. Speed selection button
5. Rotation directions
6. Magnetic materials
7. Battery unlock buttons
8. Battery pack
9. Charger
Before starting the equipment
Check the tool each time before you use it. If any flaw is visible, take the tool
to qualified personnel to fix it. Do not open the tool.
Charge the battery using the provided adapter.
Use only drills with sharp edges, in very good condition and appropriate for
the material used.
When drilling into walls, please check for the existence of hidden electric
cables, gas and water pipes.
During the functioning, the level of noise can reach 69dB - wear ear
protection!
When processing materials that produce dust or shaving, wear
safety goggles!
Dust from the materials you are working on, like lead paint, can harm
your organism – wear a breathing apparatus.
Operation
Remove the battery pack from the handle pressing the battery release latch.
Connect the charging table to the charging adapter. Plug the battery into the
charging adapter. Both LEDs will now indicate that the battery is charging.
The cordless drill is equipped with a mechanical torque setting. The torque for
a specific size of screw is selected with the set-collar. The tool must be at a
standstill when you set the torque with the setting ring.
With the direction selector, you can select the rotation direction of the drill.
To avoid causing any damage to the gearing, it is advisable to change the
direction of rotation only when the tool is at a standstill.