Heinner VSP001, Руководство пользователя

Страница: 7 / 17

6
Electric Pressure Washer
WARNING! To ensure the machine safety,
please only use original spare parts (including
nozzle) from the manufacturer or approved by
the manufacturer. Do not use the machine
before you changed them if they are damaged.
WARNING! Be care of the danger of the
kickback force on the spray assembly when
opening the trigger gun and grasp the gun with
hands firmly.
WARNING! When the machine is moving and
installing, the machine must be in flat. When
moving the machine, pulling the handle to move
it.
WARNING! Connect to the water supply.
The machines are not suitable for connection to
potable water mains.
Connect the machine to the water supply. (It
can be a water container).
Make sure the inlet water pressure keeps
between 0.01MPa and 0.4MPa.
The inlet pipe should at least 5 M long. Do not
use the pipe if the pipe is damaged.
If you want connect this machine to portable
water mains, you must install a backflow
preventer in the water pipe to prevent dirty
water flow back to the drinking water system.
The backflow preventer shall comply with EN
60335-2-79 ANNEX AA.
WARNING! Disconnect from the electrical
power supply before carrying out user
maintenance.
If the mains cable is damaged it must be
replaced by the manufacturer, or its service
agent or similarly qualified person to avoid a
hazard.
ASSEMBLY INSTRUCTIONS
You will need a standard screw driver.
Insert power card hold into the machine, as the
fig.