Page 5
ANGLE GRINDER
GRINDING WHEELS
Never use a grinding or cutting wheel bigger than the specified diameter.
Before using a grinding or cutting wheel, check its rated speed. The wheel's rated speed must
be higher than the idle speed of the right-angle grinder.
Use only grinding and cutting wheels that are approved for a maximum speed of 11,000 rpm
and a peripheral speed of 80 m/sec.
OPERATING MODES
Rough grinding
:
For the best rough grinding results, hold the grinding wheel at an angle of between 30° and 40°
to the workpiece surface and guide back and forth over the workpiece in steady movements.
Cutting:
When you use the right-angle grinder for cutting purposes, avoid tilting it in the cutting plane.
The cutting wheel must have a clean cutting edge.
A diamond cutting wheel is best used to cut hard stone.
It is prohibited to use the machine on asbestos materials!
Never use a cutting wheel for rough grinding.
TECHNICAL DATA
Nominal voltage:
230 V ~ 50 Hz
Power consumption:
2100 W
Idle speed:
6000 rpm
Max. wheel diameter:
230 mm
Drive spindle thread:
M 14
Sound pressure level LPA:
90 dB(A)
Sound power level LWA:
100.6 dB(A)
Vibration aw
3 m/s
2
