Page 3
ANGLE GRINDER
GENERAL SAFETY AND ACCIDENT PREVENTION REGULATIONS
To work safely with this machine and to prevent accidents it is imperative to read the following
safety regulations and operating instructions in full and to put all the information into practice.
Always check the machine, the power cable and the plug before use. Only ever use the
machine if it is in perfect, undamaged condition. Damaged parts are to be repaired or replaced
immediately by a qualified electrician.
Always pull the plug out of the power socket before carrying out any work on the machine,
before changing the grinding tool and in periods of non-use.
Always run the power cable away from the back of the machine to guard it from damage.
For outdoors work use only suitably approved extension cables with a minimum conductor
cross section of 1.5 mm
2
. The plug connectors must have earthing contacts and be rain-water-
proof.
Keep the machine in a safe place and out of the reach of children.
Always wear goggles, safety gloves and ear muffs when using the machine for grinding,
brushing and cutting purposes. Wear a breathing mask on dusty jobs.
For safety reasons the right-angle grinder is only to be used with the guard hood and the
additional handle fitted in place.
Secure the workpiece (with a clamp) so that it cannot slip.
It is imperative to use a dust extractor when working on stone (cutting or grinding). Make sure
the dust extractor is approved for stone dust.
It is prohibited to use the machine on asbestos materials.
Please note the accident prevention regulations in force in your country.
Caution! Risk of fire!
Make sure there are no combustible materials within the maximum
radius of flying sparks when you are cutting and grinding materials.
Use only original spare parts.
Repairs are to be carried out by qualified electricians only.
The level of noise at the workplace may exceed 85 dB(A). In this case, you will need to
introduce noise protection measures for the user. The noise produced by this electric tool is
measured in accordance with IEC 59 CO 11, IEC 704, DIN 45635 Part 21, NFS 31-031
(84/537/EEC).
Make sure of your footing. Avoid abnormal working positions.
Keep your electric tool out of the rain. Never use electric tools in wet or damp conditions, and
never use them near inflammable liquids.
Never carry the machine by its power cable. Keep the power cable safe from damage. Oil,
solvent and sharp edges can damage cables.
Keep your workplace tidy.
Make sure the power switch is off before inserting the plug in the socket.
Wear suitable clothing. Never wear loose-fitting clothes or jewelry. Use a hair-net on long hair.
For your own safety, use only the manufacturer´s accessories and attachments.
Vibration measured according to ISO 5349.
