STEP 11:
Fix the power cord on the rubber base by using four M4
screws.
Operation
Place the heater on a firm, level surface and plug into a grounded
220V-230V 50 Hz power outlet. Only operate the heater when it is in
the upright position and the base is attached.
The electric halogen patio heater is equipped with 3 heating setting:
Low, Medium and High.
To operate the heater on low (900W), press the switch on the right.
This switch has a single white dot near the top. Once the low
switch is pressed, the smaller bottom heating element will glow
and radiate heat.
To operate the heater on Medium (1200W), press the switch on
the left. This switch has two white dots near the top. Once the
medium switch is pressed, the larger top heating element will glow
and radiate heat.
To operate the heater on High (2100W), press both the low and
medium switches. This will cause both the bottom and top heating
elements to glow and radiate heat.
Although the heater is shower proof, DO NOT use when raining
or in wet conditions.
Always disconnect the power cable from the electrical supply
when the patio heater is not in use.
MAINTENANCE
Unplug the unit and let it cool completely.
To keep this unit clean, the outer shell may be cleaned with
a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders, furniture
polish, or rough brushes to clean the heater. This may
cause damage or deterioration to the surface of the heate
r.
Although this heater is outdoor approved, DO NOT immerse
the heater in water for your safety.
Wait until the unit is completely dry before use.
