STEP 4:
Connect the top pole with the middle pole by screwing together. .
STEP 5:
Fix the Table on the Pole by screwing the plastic fixation part.
STEP 6:
Tighten the Plastic Fixation Part by screwing the Screw Knob.
STEP 7:
Connect the middle pole with top pole by screwing them
together.
STEP 8:
Place the power cord plug through the top pole, middle pole and bottom
pole. Pull the power cord through the bottom of the base as far as it will
go.
STEP 9:
Place the heater head assembly onto the top pole. Secure it with two
φ
4*8mm screws.
STEP 10:
Raise or retract the top tube to the desired height and tighten
to the middle tube by screwing knob down.
