Reciprocating saw
through the after-sales service organization or qualified professional person. Loosen the carbon brush cover anti-
clockwise with using a screwdriver, open the cover and remove the carbon brushes.
If they are 6 mm or less then they must both be replaced. Fit new carbon brushes and change it.
CAUTION: The brushes must always be replaced in pairs.
CAUTION: Always disconnect the machine from the power supply before removing any electrical covers.
RECYCLING
Electrical and electronic equipment waste (WEEE) might contain dangerous materials which can have a negative impact
on the environment and human health if not collected separately.
This item is in conformity with the European Directive EU WEEE (2012/19/EU) and is marked with an electronic and
electrical waste logo graphically represented in the image below.
This icon shows that WEEE should not be collected with household waste but separately.
We recommend you to consider the following:
- Materials and components used when manufacturing this item are high quality materials which can be
reused and recycled;
- Do not throw away the item with household waste at the end of life;
- Take the item to a collecting point where it will be collected for free;
- Please contact the local authorities for details on the collecting centers.
Conformity with the RoHS Directive: the item you purchased is in conformity with the EU Directive RoHS (2011/65/UE). It
does not contain materials listed as harmful or prohibited in the Directive.
Thank you for helping us protect the environment and our health!
Manufactured for
Network One Distribution
Marcel Iancu St., no. 3-5, Bucharest, 020757
2017
