Reciprocating saw
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
a) Hold tool by insulated grip surface when performing an operation where the cutting tool may contact the hidden wiring
or its own cord. Contact the alive wire make exposed the metal parts of the tool alive and shock the operator.
b) Do not stare at the tool with the blade touching any surface. The blade action will bounce the tool and may cause
bodily injury.
c) Allow the tool to come to a complete stop before putting it down. A running tool will jerk when the blade tip contacts
any surface.
d) Always wear safety glasses or goggles, normal prescription eye or sunglasses are not safety glasses
e) Do not cut oversized work pieces
f) Do not cut nails or screws unless you are using a blade specifically designed for this purpose, inspect your material
before cutting
g) Before switching on the tool, be sure the blade in not contacting the work piece.
h) Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below work surface
while saw is operating.
i) Check your area for proper clearance before cutting. This will avoid cutting into your workbench, the floor, etc.
Explanation of symbols
Conforms to relevant safety
standards
To reduce the risk of injury, the user
must read and understand this
manual before using this product.
Wear ear protectors. Exposure to
noise can cause hearing loss.
Wear eye protection.
Wear respiratory protection.
Do not dispose of old appliances
with domestic rubbish
Double insulation
Technical Specification
Model
VFSU001
Rated voltage
/frequency
220-240V 50/60HZ
Rated power
710W
No load stroke
rate
0-2500/min
Max.cutting
depth in wood
115mm
Standard
accessories
Carbon brush --- 1pair
Metal-cutting saw blade -- 1 pc
Wood-cutting saw blade --- 1pc
Hex wrench---1pc
Function description (Fig. 1)
1.
Blade
2.
Pivot shoe
3.
Quick-release blade clamp
