Heinner ROH12, Инструкция по эксплуатации

Страница: 4 / 24

4
EN
switch whilst carrying the electric tool or if you
connect the appliance to the mains when it is
switched on, this can lead to accidents.
Remove the keys and wrenches before
switching on the electric tool.
A tool or key
which comes into contact with rotating parts of
the appliance can lead to injuries.
Avoid abnormal working postures. Make sure
you stand squarely and keep your balance at
all times.
This way, you can control the electric
tool better in unexpected circumstances.
Wear suitable work clothes. Do not wear loose
clothing or jeweler. Keep hair, clothes and
gloves away from moving parts.
Loose
clothing, jewelery or long hair can get trapped
in moving parts.
If vacuuming and draining devices can be
fitted, make sure that these are correctly
attached and used.
The use of a dust extraction
system can reduce the danger posed by dust.
Usage and treatment of the electric tool
Do not overload the appliance. Use the correct
tool for your work.
You will be able to work
better and more safely within the given
performance boundaries.
Do not use an electrical tool with a defective
switch.
An electric tool that cannot be switched
on or off is dangerous and must be repaired.
Pull the plug out of the socket and/or remove
the battery before making any adjustments to
the appliance, changing accessories or put the
appliance down.
This safety measure prevents
starting the electric tool unintentionally.
Keep unused electric tools out of the reach of
children. Do not allow people who are not
familiar with the appliance or who have to
read these instructions to use the appliance.
Electric tools are dangerous if they are used by
inexperienced people.
Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts are
broken or damaged enough that the
functioning of this electric tool is affected.
Have damaged parts repaired before using the
appliance.
Many accidents are caused by badly
maintained electric tools.
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
edges will jam less and are easier to control.
Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account.
Using
electric tools for any purpose other than the
one for which they are intended can lead to
dangerous situations.
Service
Have your electric tool repaired only by
trained personnel using only genuine spare
parts.
This will ensure that your electric tool
remains safe to use.
Description of symbols
Pa y attention to all the signs and symbols
shown in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important!
Read the instructions for use before
starting the machine!
Wear safety goggles!
Wear ear protection!
Always use breathing apparatus
when machining materials which
generate dust!
PROPER USE
The tool is to be used for drilling into concrete,
brick or stone, but also for chiseling. It can also
be used for drilling without impact on wood,
metal, ceramic or plastic.
The machine is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and