Heinner ONIX ECO HAC-CO12WFN-BK, Руководство пользователя

Страница: 19 / 86

18
performance Cold air is entering through doors
and windows
Make sure that all doors and windows
are closed during use
Low refrigerant due to leak or long-
term use
Check for leaks, re-seal if necessary and
top off refrigerant
Indicator lamps
continue flashing
The unit may stop operation or continue to run safely. If the indicator lamps
continue to flash or error codes appear, wait for about 10 minutes. The problem
may resolve itself.
If not, disconnect the power, then connect it again. Turn the unit on.
If the problem persists, disconnect the power and contact your nearest customer
service center.
Error code appears
in
the window
display of indoor
unit:
• E0, E1, E2…
• P1, P2, P3…
• F1, F2, F3…
NOTE: If your problem persists after performing the checks and diagnostics above, turn off
your unit immediately and contact an authorized service center.
CAUTION
In the case of ANY of the following, turn off the unit immediately!
--
Power cord is damaged or abnormally warm.
-- Burning odous are smelled.
-- Loud or abnormal sounds are heard.
-- A power fuse blows or a circuit breaker trips frequently.
-- Water or other objects fall into or out of the unit.
DO NOT ATTEMPT TO CORRECT THESE ITEMS YOURSELF!
CONTACT AN AUTHORIZED SERVICE PROVIDER!