Heinner MG-2100RD, Руководство пользователя

Страница: 6 / 46

www.heinner.com 2100W, 50/60Hz, 220-240V
5
VI. USING INSTRUCTIONS
ASSEMBLING
Press the fasten button
，
hold the head and insert it into the inlet(when inserting
please pay attention the head must be slanted as per arrow indicated on the top, see
fig.1), then move the head anticlockwise so that the head being fastened tightly.(fig.2)
Place the snake into the head, long end first, and turn to feed the screw slightly until
it is set into the motor housing (fig.3).
Place the cutting blade onto the snake shaft with the blade facing the front as
illustrated (fig.4). If it is not fitted properly, meat will not be grinded.
Place the desired cutting plate next to the cutting blade, fitting protrusions in the slot
(fig.5).
Support or press the center of the cutting plate with one finger then screw the fixing
ring tight with another hand (fig.6). Do not over tighten.
Place the hopper plate on the head and fix it into position.
Locate the unit on a firm place.
The air passage at the bottom and the side of the motor housing should be kept free
and not blocked.
27. This appliance can be used by children aged from 8 years and above if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they understand
the hazards involved. Cleaning and user maintenance shall not be made by children unless they
are aged from 8 years and above and supervised. Keep the appliance and its cord out of reach of
children aged less than 8 years.
28. This appliance is intended to be used only in household.