Heinner HWM-V6010D++, Руководство пользователя

Страница: 34 / 88

www.heinner.com 6Kg, 220-240V~50Hz, 1000rpm
33
PUMP FILTER
A filter system which avoids threads remaining from your laun- dries and tiny materials
from entering into the pump during water discharging operation carried out by your
machine after complet- ing washing so prolonging the lifecycle of your pump is available. It
is recommended that you clean your pump filter once in 2 months. To clean pump filter:
•
To open the pump cover, you can use the powder detergent spade or liquid detergent
level plate coming out of your machine.
•
Fit the end point of the plastic part to the gap of the pump cover and push it back. This
will open the cover.
•
Before opening the filter cover, settle a vessel in front of the filter cover to prevent the
water remained in the machine from flowing on the ground.
•
Loosen the filter cover in counter-clockwise and then empty water.
Note: You may have to empty the water collection vessel several times according to the
amount of water in the machine.
•
Clean the foreign materials in the filter with a brush.
•
After cleaning the filter, fit the cover and tighten it by rotating it in clockwise direction.
•
While closing the pump cover, ensure that the parts on the inner side of the cover to
match the holes on the front panel side.
•
You can reattach the pump cover in the reverse order that you removed it.
As water in the pump may be hot, wait until it cools down.