www.heinner.com 1200W, 50Hz, 220-240V
6
Problem
Possible reason
Active
Motor does not start
-Power card not firmly plugged
into outlet
-Outlet damaged
-Cleaner not switch on
-Plug unit firmly
-Check the outlet
-Switch on the appliance.
Suction power is weaker
-unit clogged
-Dust filter needs cleaning
-Dust container not in position
-Filter blocked
-Remove the blockage
-Clean the dust filter
-Close the dust container
-Clean the filter
The wire can not be
winded completely.
The wire may diverge the wire
wheel.
Draw the wire a little then
rewind.
The wire can not be draw
out.
The wire may wind disorder
Press the rewinder button
and try again.
Speed adjust does not
work
Appliance is defective
Repair the appliance (only
specialist)
Power
card
winds
unwanted back
Rewind mechanisms is defective
Repair the appliance
(only specialist)
The dust container can
not be closed
Dust filter is not in the position
Fix the dust filter and try
again
Power
1200W
Suction power
≥
270W
Voltage:
220-240 V, 50 Hz
Noise level
82 dB
Dust capacity:
1,5 L
VIII. TECHNICAL DETAILS
VII. TROUBLESHOOTING
