Heinner HMFR-150SS, Руководство пользователя

Страница: 19 / 41

www.heinner.com 450-550W, 50/60Hz, 220-240V
18
6. When the appliance has stopped operating, open the lid, pour out the frothed milk
and enjoy it.
Caution: Minimum 3 minutes rest time must be maintained between two continuous
cycles, otherwise, the appliance will enter self-protection state automatically after
working for 5 cycles continuously, the working indicator will flash and the switch button
will not be activated, after about 5 minutes, the appliance will enter standby state and
you can continue operating the appliance.
Note: Please clean the jar according to the section “CLEANING AND MAINTENANCE”
between two continuous cycles.
7. Always turn off the milk frother and disconnect the power supply when not use.
ONLY HEATING SEPARATELY, WITHOUT FROTHING
1.
Place the appliance on a flat surface.
2. Select mixing paddle according to your task. Then open the lid, insert the mixing
paddle onto the shaft on the bottom of jar.
Note: The accessory used for this function is mixing paddle. Milk overflowing may
occur if using frothing paddle instead.
3.
Fill the jar with desired amount of milk and replace the lid.
Note: The max milk quantity permitted to add is 300ml (see Fig. 1), to avoid milk
overflowing after mixing. The min milk quantity permitted to add is 75ml.
Note: Please use whole milk, frozen milk (5-10˚C).
4.
Connect the plug into a power outlet.
5. Press the heat button once, the working indicator will light up. Then the appliance
will start to work. Once the temperature of milk has achieved the setting value,
appliance will stop working;
6. When the appliance has stopped operating, open the lid, pour out the warm milk
and enjoy it.
Caution: Minimum 3 minutes rest time must be maintained between two continuous
cycles, otherwise, the appliance will enter self-protection state automatically after
working for 5 cycles continuously, the working indicator will flash and the switch button
will not be activated, after about 5 minutes, the appliance will enter standby state and
you can continue operating the appliance.
Note: Please clean the jar according to the section “CLEANING AND MAINTENANCE”
between two continuous cycles.
7.
Always turn off the milk frother and disconnect the power supply when not use.