13
Combined detergent
Detergent manufacturers also produce combined detergents called “2 in 1”, “3 in 1” or “5 in 1”
etc.
“2 in 1” deter
gents c
ontain det salt or rinse aid. When using “2 in 1” detergents make
sure to check the specifications of the tablet.
Other tablet detergents contain det rinse aid + salt + varlous extra functions.
Generally, combined detergents produce sufficient results under certain usage conditions only.
Such detergents contain rinse aid and/or salt in preset amounts.
Points to consider when using this type of products:
•
Always make sure to check the specifications of the product you will use or whether or
not it is a combined product.
•
Check if the detergent used is appropriate for the hardness of mains water that
machine is appertaining to.
•
Observe the instructions on packagings when using such products.
•
If such detergents are in the form of tablets, never put them into the interior section or
the cutlery basket of the dishwasher. Always put the tablets into the detergent
compartment in the detergent dispenser.
•
They produce good results for certain types of usage only. If you are using this type of
detergents, you need to contact the manufacturers and find out about the suitable
conditions of use.
•
When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
•
Contact the detergent manufacturers if you are not obtaining good wash results (if
your dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The
scope of warranty for your machine does not cover any complaints caused by the use
of these types of detergents.
Recommended usage:
If you want to obtain better results while using combined detergents,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid
setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary depending on the
temperature and time. Therefore, it is not recommended to use such detergents in short
programs. It is more suitable to use powder detergents in such programs.
Warning:
Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
When you give up using combined detergents
•
Fill the salt and rinse aid compartments.
•
Adjust the water hardness setting to the highest position (6) and run an empty-wash.
•
Adjust the water hardness level.
•
Make the suitable rinse aid setting.
Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment
with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.
In order to change the rinse aid level, follow the below steps before turning on the machine:
•
Touch the programme button and hold it down.
•
Turn on the machine.
•
Hold down the programme button until “rA” disappears.Rinse aid set follows water
hardness set.
•
The machine will display the current setting.
•
Set the level by touching the programme button.
•
Switch off the machine to save the setting
The factory setting is “4”.
Содержание HDW-FS6006WE++
Страница 58: ...www heinner com 57 ...
