19
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Whitish stains remains on dishes.
Not enough detergent used.
Use the correct amount of detergent, as instructed in the programme
table.
Rinse aid dosage and/or water
softener setting set too low.
Increase rinse aid and/or water softener level.
High water hardness level.
Increase water softerner level and add salt.
Salt compartment cap not closed
properly.
Check that the salt compartment cap is closed properly.
Dishes do not dry.
Drying option is not selected.
Select a programme with a drying option.
Rinse aid dosage set too low.
Increase rinse aid dosage setting.
Rust stains form on the dishes.
Stainless-steel quality of the dishes
is insufficient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using water hardness table.
Salt compartment cap not closed
properly.
Check that the salt compartment cap is closed properly.
Too much salt spilled in the
Dishwasher while filling it with salt.
Use funnel while filling salt to the compartment to avoid spillage.
A poor mains grounding.
Consult a qualified electrician immediately.
Detergent remains in the detergent
compartment.
Detergent was added when the
detergent compartment was wet.
Make sure detergent compartment is dry before use.
