23
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Whitish stains remains on dishes.
Not enough detergent used.
Use the correct amount of detergent, as instructed in the programme
table.
Rinse aid dosage and/or
water softener setting set
too low.
Increase rinse aid and/or water softener level.
High water hardness level.
Increase water softerner level and add salt.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is closed properly.
Dishes do not dry.
Drying option is not selected.
Select a programme with a drying option.
Rinse aid dosage set too low.
Increase rinse aid dosage setting.
Rust stains form on the dishes.
Stainless-steel quality of the
dishes is insufficient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using water hardness table.
Salt compartment cap not
closed properly.
Check that the salt compartment cap is closed properly.
Too much salt spilled in the
Dishwasher while filling it with
salt.
Use funnel while filling salt to the compartment to avoid
spillage.
A poor mains grounding.
Consult a qualified electrician immediately.
Detergent remains in the detergent
compartment.
Detergent was added when
the detergent compartment
was wet.
Make sure detergent compartment is dry before use.
