Heinner HDW-BI4505A++, Руководство пользователя

Страница: 15 / 51

www.heinner.com
14

Press the Power On/Off button (1), the End Of Programme Indicator (4) will illuminate.

Select the programme most suitable for your dishes using the Programme Selection
button (2).

The number corresponding to the selected programme (5) will illuminate on the display
and the End Of Programme Indicator will switch off.

The programme will start automatically when the door is closed.

Press the Half Load button (6) to reduce the duration of your selecte programme, and
therefore decrease your energy and water consumption.

Press the Tablet detergent button when you use combined detergents that include salt
and rinse aid.
NOTE (only for models with extra features): If an extra feature has been used on the most recent
wash programme, this feature will remain active on the next selected programme. If you want to
cancel this feature on the newly selected wash programme, press the feature button until the
light on the button switches off.
NOTE: If you decide not to start the selected programme, please see the "Changing a
Programme" and "Cancelling a Programme" sections.
NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (4) will illuminate
to indicate the salt chamber needs filling.
NOTE: When there is insufficient rinse aid, the Rinse Aid Lack Warning Indicator
(4) will illuminate
to indicate the rinse aid chamber needs filling.
Delaying the Programme
Press the Delay button to delay the start time of a programme for 3, 6 or 9 hours. Pressing once
will delay the start time for 3 hours, pressing twice for 6 hours, and three times for 9 hours. The
programme can be selected first and the delay duration after, or vice versa. Press the Delay Timer
button to change or cancel the delayed start time. The remaining delay time will show on the
display and the light corresponding to the delay duration (3h, 6h, 9h) will be on.
Changing a Programme
NOTE: Open the door slightly at first to stop a programme before it is complete in order to avoid
water spillage.
IX. CONTROL PANEL