Heinner HCVH-Y2000TSL, Руководство пользователя

Страница: 14 / 29

www.heinner.com 750/1250/2000W, 220-240V~50Hz
USING OF THE APPLIANCE
d.
Turn the temperature knob to the right, the heater is turned on. Set the thermostat to the
highest temperature MAX.
e. Once reached the desired temperature, turn the thermostat counterclockwise along until
it reaches the thermostat the unit turns off by an audible "click".
f. The set room temperature is thus maintained by the convector almost.
KNOB POSITION
Turn the knob to desired heating level according to the table below:
First setting 750W
Second setting 1250W
Third setting 2000W
V. CLEANING AND MAINTENANCE

Before undergoing maintenance, please disconnect the power cord plug out the power
source, can be carried out after 10 minutes cooling down.

The surface area of dust, with a soft cloth to wipe; When the surface is too dirty, available
below 50 degrees Celsius of the mixture of water and neutral detergent touch water to
wipe with a soft cloth and dry.

Do not use while clean gasoline, days that water, diluent and any easy to damage the
surface material; because these things may react with heater and cause discoloration.

Product when not in use for a long period of time, unplug the power plug, wrap the
machine to prevent dust into the machine.

When the heater should be cold, dry, packaged storage and dry ventilated place
，
as this
may damage the appliance.

In case of breakdown and/or poor functioning of the appliance, disconnect the appliance
from the power supply and contact an authorized repairer.