Heinner HCNF-N300XWDF+, Руководство пользователя, Страница: 10 / 128

www.heinner.com
9
IX. INSTALLING
Before using the appliance for the first time, you should review the following tips.
Ventilation of appliance
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain
good ventilation around the appliance. For this reason, sufficient clear space should be available
around the refrigerator.
It is advisable for there to be at least (50~70) mm of space from the back to the wall, at least
100mm from its top, at last 100mm from its side to the wall and a clear space in front to allow
the doors to open 115°. Please see the following diagrams.
Note: This appliance performs well within the climate class from SN to ST showed in the table
below. It may not work properly if left at a temperature above or below the indicated range for
a long period.
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Stand your appliance in a dry place to avoid moisture damage.
Keep the appliance out of direct sunlight, rain or frost. Stand the appliance away from heat
sources such as stoves, fires or heaters.
Levelling of appliance
For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom
feet may need to be adjusted
You can adjust them manually using a suitable spanner. To allow the doors to self-close, tilt the
top backwards by about 10mm.
Reversing the door
The side at which the door opens can be changed, from the right side (as supplied) to the left
side, if required.
Warning! When reversing the door, the appliance must not be connected to the mains. Ensure
that the plug is removed from the mains socket.