Heinner HCF-400M, Руководство пользователя

Страница: 4 / 53

www.heinner.com
3
IV. INSTALATION
• This appliance is designed to be free standing only, and should not be recessed or
built-in.
•
Place your freezer on a floor that is strong enough to support the freezer when it is
fully loaded.
•
Allow 15 cm of space between the back and sides of the freezer, which allows the
proper air circulation.
•
Locate the freezer away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient temperatures may also cause the freezer not
to perform properly.
•
Avoid locating the freezer in moist areas.
• Plug the freezer into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized service center.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3
hours before placing food in the freezer compartment.