32
Troubleshooting
Caution!
Before troubleshooting, disconnect the power supply. Only a qualified
electrician of competent person must do the troubleshooting that is not in this
manual.
Important!
There are some sounds during normal use (compressor, refrigerant
circulation).
Problem
Possible Cause
Solution
Appliance does not
work
Mains plug is not plugged in or
is loose
Insert mains plug
Fuse has blown or is defective
Check
fuse,
replace
if
necessary
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too
warm
Temperature is not properly
adjusted.
Please look in the initial
Temperature Setting section
Door was open for an
extended period
Open the door only as long as
necessary
A large quantity of warm food
was placed in the appliance
within the last 24 hours
Turn
the
temperature
regulation to a colder setting
temporarily.
The appliance is near a heat
source
Please look in the installation
location section
Appliance cools too
much
Temperature is set too cold
Turn
the
temperature
regulation knob to a warmer
setting temporarily
Unusual noises
Appliance is not level
Re-adjust the feet
The appliance is touching the
wall or other objects.
Move the appliance slightly
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
Appliance or the wall
If necessary, carefully bend
the component out of the
way.
Water on the floor
Water drain hole is blocked
See the Cleaning section
Side panel is hot
Condenser is inside the panel
It's normal