8Kg, 220-240V~50Hz
13
PROBLEM
REASON
SOLUTION
The dryer cannot be opened or
the programme cannot be
started. The dryer does not get
activated when adjusted
.
The dryer might not be plugged in.
Make sure that the plug is fitted in the
socket.
The loading door might be open.
Make sure that the loading door is properly
closed.
You might not have set a programme or pressed
the Start/Pause key.
Make sure that the programme has been set
and the dryer is not in the Standby (Pause)
mode.
Child lock might be active.
Deactivate the child lock.
The programme has been
interrupted for no reason
The loading door might not be closed properly.
Make sure that the loading door is
properly closed.
There might have been a power failure.
Press the Start/Pause key to start the
programme.
The water tank might be full.
Empty the water tank.
Clothes have shrunk, felted or
deteriorated.
The programme used might not be suitable for the
type of laundry.
Check the care labels on the laundry items,
select a suitable programme for the type of
laundry.
Water leaking from the loading
door.
There might be lint accumulated on the inner
surfaces of the loading door and on the surfaces of
the gasket of the loading door.
Clean the inner surfaces of the loading door
and the surfaces of the gasket of the loading
door.
The loading door opens on its
own.
The loading door might not be closed properly.
Push the loading door until you hear the
closing sound
The water tank warning symbol
is on/flashing.
The water tank might be full.
Empty the water tank.
The water discharge hose might be bent.
If the product is connected directly to the
water outlet, check the water discharge
hose
The filter cleaning warning
symbol is on.
The lint filter might be unclean.
Clean the filter.
The filter cleaning warning
symbol is flashing.
The filter seat might be clogged by lint.
Clean the filter seat.
There might be a layer that causes obstruction on
the surface of the lint filter.
Wash the filter with lukewarm water.
The condenser might be clogged.
Wash the condenser.
The program can not be started
and the filter warning led is
blinking
The filter seat might be clogged by lint.
Clean the filter seat.
There might be a layer that causes obstruction on
the surface of the lint filter.
Wash the filter with lukewarm water.
The condenser may not be placed.
Replace the condenser.
The program can not be started
and both condenser and filter
warning leds are blinking
The condenser and filter may not be placed.
Replace the filter and condenser.
The filter and condenser warning leds are blinking
even though the filter and condenser are placed.
Call technical service.
