Heinner HB-600BG, Руководство пользователя

Страница: 19 / 45

www.heinner.com 600W, 50Hz, 220-240V
18
Maximum uptime cannot exceed 1 minute. Idle time between two consecutive cycles
must be at least 3 minutes.
01. To mount accessories detachable camera unit , turn the camera to the right until
they are secure.
02. Connect the outlet .
03. Carefully lower the blender bowl with food. Then press and hold the button low
speed to start using it. Meanwhile, you can select the speed by pressing the speed
control button . There are five gears : 1, 2 , 3, 4 , 5 (from low speed to high speed ) .
04. Also, the blender can operate by touch and by mentinereaa turbo button pressed .
The device will always work to the highest speed .
05. To stop the blender, release the button low speed or high speed .
Instructions for chopper
Maximum uptime can not exceed 1 minute. Idle time between two consecutive cycles
must be at least 3 minutes.
01. Place the dish on a clean, flat surface.
02. Assemble the stainless-steel chopping blade in the bowl, as shown in Figure 1.
03. Place the food in the bowl.
Note: remove the bones from the meat, cut it in small pieces, then put the meat in the
bowl , the maximum amount of meat can not exceed 200 g of each mixture.
04. Attach the lid and turn it clockwise until it snaps into place (See Figure 2). To
remove the lid, turn in the opposite direction.
05. Insert the drive into the bowl , and turn to the right to lock it (See Figure 3).
06. Connect the outlet. Then press and hold the button low speed to start using it.
Meanwhile, you can select the speed by pressing the speed control button. There are
five gears: 1, 2 , 3, 4 , 5 (from low speed to high speed).
07. Also, the blender can be operated by pressing and holding the turbo button. The
device will always work to the highest speed.
08. To stop the machine , release the button low speed or high speed .
09. After the grinding process is finished , remove the unit from the wall outlet plug ,
and then remove the cutter unit cap by turning it to the left.
10 . Open the cutter cover by turning it anticlockwise and remove chopped food .
VI. USING INSTRUCTIONS