Heinner HAC-09OWF-BK, Руководство пользователя

Страница: 5 / 86

4
Electrical warnings
•
Only use the specified power cord. If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard.
•
Keep power plug clean. Remove any dust or grime that accumulates on or around
the plug. Dirty plugs can cause fire or electric shock.
•
Do not pull power cord to unplug unit. Hold the plug firmly and pull it from the
outlet. Pulling directly on the cord can damage it, which can lead to fire or electric
shock.
•
Do not modify the length of the power supply cord or use an extension cord to
power the unit.
•
Do not share the electrical outlet with other appliances. Improper or insufficient
power supply can cause fire or electrical shock.
•
The product must be properly grounded at the time of installation, or electrical
shock may occur.
•
For all electrical work, follow all local and national wiring standards, regulations, and
the Installation Manual. Connect cables tightly and clamp them securely to prevent
external forces from damaging the terminal. Improper electrical connections can
overheat and cause fire and may also cause shock. All electrical connections must be
made according to the Electrical Connection Diagram located on the panels of the
indoor and outdoor units.
•
All wiring must be properly arranged to ensure that the control board cover can
close properly. If the control board cover is not closed properly, it can lead to
corrosion and cause the connection points on the terminal to heat up, catch fire, or
cause electrical shock.
•
If connecting power to fixed wiring, an all-pole disconnection device which has at
least 3mm clearances in all poles, and have a leakage current that may exceed 10mA,
the residual current device(RCD) having a rated residual operating current not
exceeding 30mA, and disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
Fuse specifications
The air conditioner’s circuit board (PCB) is designed with a fuse to provide overcurrent
protection. The specifications of the fuse are printed on the circuit board, such as:
T3.15AL/250VAC, T5AL/250VAC, T3.15A/250VAC, T5A/250VAC, T20A/250VAC, T30A/250VAC,
etc.
NOTE: For the units using R32 or R290 refrigerant, only the blast-proof ceramic fuse can be
used.
Warnings for product installation
1. Installation must be performed by an authorized dealer or specialist. Defective installation
can cause water leakage, electrical shock, or fire.
2. Installation must be performed according to the installation instructions. Improper
installation can cause water leakage, electrical shock, or fire. (In North America, installation
must be performed in accordance with the requirement of NEC and CEC by authorized
personnel only.)
3. Contact an authorized service technician for repair or maintenance of this unit. This
appliance shall be installed in accordance with national wiring regulations.
4. Only use the included accessories, parts, and specified parts for installation. Using non-
standard parts can cause water leakage, electrical shock, fire, and can cause the unit to fail.
5. Install the unit in a firm location that can support the unit’s weight. If the chosen location
cannot support the unit’s weight, or the installation is
not done properly, the unit may drop
and cause serious injury and damage.