www.heinner.com 80 W, 50/60Hz, 220-240V
31
UV Sterilize Light
A variety of bacteria can be killed by the 365 nm UV light. The UV germicidal lamp is used to
purify the air and it is able to eliminate odor caused by smoke and mold.
Anion Release
The ionizer releases large amounts of anions and make the oxygen negatively-charged, thus
gathering the positively-charged particles like floating dust, bacteria, viruses and smoke.
The particles become denser and sink to the ground. the smaller the particle size, the
higher the capture rate.
FUNCTION DESCRIPTIONS
1. Remote control
The product is equipped with remote control, use the button cell
(If don’t use the remote
control for a long time, please take out the battery
).
Note: The buttons on the remote control, the corresponding buttons on the operation
panel, function and operation method are exactly the same, otherwise no introduction.
2. Product use
•
Intelligent operation, the machine under the status of the power supply is
connected, press the power button, and the smart key, the machine can run under
the sensor intelligent induction. The operation of the motor gear will follow sensors
adjusted value. This operation can use the vast majority of applications.
•
Enforce running, the machine under the status of the power supply is connected,
press the power button, key selection according to wind speed motor gear, to select
on or off negative ions and UV germicidal lamp. Complete the purification function,
suitable for the operating manual intervention force purification applications. In this
mode cannot be automatically shift machine.
•
The above two kinds of operating modes when it runs at night, as long as the sleep
button is automatically in the purification of a machine, to ensure that no noise, will
not affect your rest.
•
Regular operation, the above three kinds of operation mode, simply press time, the
setting of the machine
•
running time, it will run the countdown, will stop running automatically after the
times out. (If needs to cancel the timing, long press time 3 seconds to cancel this
function.)
•
Child lock mode, as long as you press the Child lock button, the control panel and
buttons on the remote control cannot work. (Long press 3 seconds locked to lift, or
press the unlock button on the remote control).
