www.heinner.com 80 W, 50/60Hz, 220-240V
26
Press this button to set the working time. Every time increase 30 minutes. It will
recycle after 12 hours. You can press 3 seconds to exit this mode. The machine will go into
standby mode and exit timer mode if you press this button but machine not at purifying
mode.
(Display panel will show 00:30 1:00 1:30 2:00 2:30)
UV sterilize on/off after press this button when machine running. Icon will light up
or down at the same time. Motor will turn on and stay low speed mode if you press this
button at standby mode.
Press auto button on the control panel, machine into auto mode, “Auto”
indicator on the panel. Under this mode, according to the degree of air pollution, automatic
to start work, air volume automatically adjust. PM2.5<60 (Low speed), 60
≤
PM2.5<150
(Medium speed), PM2.5
≥
150 (High speed).
The display panel and light will turn off when sleep mode start. Motor only works
at low speed. Timer is available at this mode. Machine will at standby mode after the time
setting finish. Press any button to exit sleep mode.
Press this button can adjust the motor speed at Low(500RPM), Medium(700RPM),
High
(900 RPM) and let the machine exit auto mode. The motor speed won’t control by
sensor if
it’s
modified without permission.
Press child lock for 5 seconds when at normal working mode (child lock mode
does not start), it will show accumulated working time of the filter. It will disappear after 3
seconds.
