Heinner CJS08L, Инструкция по эксплуатации

Страница: 4 / 30

4
MULTIFUNCTION SAW
Avoid abnormal working postures. Make sure you
stand squarely and keep your balance at all times.
In this way, you can control the electric tool better
in unexpected circumstances.
Wear suitable work clothes. Do not wear loose
clothing or jewelry. Keep hair, clothes and gloves
away from moving parts.
Loose clothing, jewelry
or long hair can get trapped in moving parts.
If vacuuming devices and draining devices can be
fitted, make sure that these are correctly
attached and correctly used.
The use of a dust
extraction system can reduce the danger posed by
dust.
Usage and treatment of the electric tool
Do not overload the appliance. Use the correct
tool for your work.
You will be able to work better
and more safely within the given performance
boundaries.
Do not use an electrical tool with a defective
switch.
An electric tool that cannot be switched on
or off is dangerous and must be repaired.
Pull the plug out of the socket and/or remove the
battery before making any adjustments to the
appliance, changing accessories or put the
appliance down.
This safety measure prevents
starting the electric tool unintentionally.
Keep unused electric tools out of the reach of
children. Do not allow people who are not
familiar with the appliance or who have to read
these instructions to use the appliance.
Electric
tools are dangerous if they are used by
inexperienced people.
Clean your electric tool carefully. Check whether
moving parts are functioning properly and not
jamming, whether parts are broken or damaged
enough that the functioning of this electric tool is
affected. Have damaged parts repaired before
using the appliance.
Many accidents are caused by
badly maintained electric tools.
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area and the job in hand into account.
Using
electric tools for any purpose other than the one
for which they are intended can lead to dangerous
situations.
Using and handling the cordless tool
Ensure that the tool is switched off before you
insert the battery.
Inserting a battery into a tool
that is switched on can cause accidents.
Only charge the batteries in chargers that are
recommended by the manufacturer.
A charger
that is designed for a certain type of battery may
pose a fire risk if it used with other type of
batteries.
Use only the correct batteries in the electric tools.
The use of other batteries may result in injuries
and a fire risk.
Keep unused batteries away from paper clips,
coins, keys, nails, screws and other metallic
objects that could cause a short circuit between
the contacts.
A short circuit between the battery
contacts may cause burns or a fire.
In case of incorrect use, fluid may escape from
the battery. Avoid contact with it. If you touch it
by accident, rinse the affected area with water. If
you get the fluid in your eyes, also seek medical
advice.
Leaking battery fluid can cause skin
irritation or burns.
Service
Have your electric tool repaired only by trained
personnel using only genuine spare parts.
This will
ensure that your electric tool remains safe to use.
Description of symbols
Pay attention to all the signs and symbols shown in
these instructions and on your tool. Make a note
of these signs and symbols. If you interpret the
signs and symbols correctly, your work with the
machine will be safer and better.
Important!