Heinner CHARM HMB-350BG, Руководство пользователя

Страница: 14 / 43

www.heinner.com 300W, 50/60Hz, 220-240V
13
Before assembly's mixer, wash blades emulsifying and kneading blades and bowl in
warm water. Then dry them. Make sure the power cord is unplugged and speed
selector knob is set to "0".
01. Select the accessories you want, depending on the mixing task that will be
performed: blades emulsifying (mixing / battery) or kneading blades.
02. Introducing emulsifying blade / vane ridden.
Blades emulsifying / kneading blades are inserted into the specified position.
Note: To ensure that the blades or blades for kneading emulsifying fully and properly
placed in socket’s mixer, mixing different results may be affected.
Note: Only one accessory can be used only once.
V. BEFORE USING
VI. USING INSTRUCTIONS
1. Place the unit on a clean, flat surface.
2. Set appropriate mixer blades.
3. Put mixer on its support site and make sure that the jacks on the bottom of it are
aligned with the slots of the support block (see Figure 1). You will hear a click when
its mixer is in the correct position. When detached unit's mixer, press and hold the
release button with a handful of it, and then raise the other unit's mixer.
4. Put ingredients in bowl. The amount of ingredients should not exceed 80% volume
of the bowl (its maximum volume is 3.3L).
5. Make sure the speed selector knob to "0", then connect the camera to the power
supply.
6. Set the speed to the desired speed. There are 5 speed settings to be selected.
Mixer will run at the highest speed when you press the turbo button.
7. Maximum operating time should not exceed seven minutes. Idle time is less than
20 minutes. This time is maintained between two cycles continue.
8. When mixing is complete, turn the selector level in position "0" and disconnect the
cable from the wall outlet.